High speed Needle loom | Needle punching machine | Nonwoven needle production line

Applications

Suitable for the reinforcement and modificationof high-density needle-punched non-wovens,There are 4 punching ways, pre-punching, counter-punching, up-ward punching, main-punching.

Specification

Working Width:2000-8000mm
Needle Density:4000-7000n/m
Stroke:30-50mm
Frequency:800-1200r/min

Structural features:

1、Needle board messy cloth needle, computer punching, magnesium aluminum alloy needle board, PU plated surface. Support plate, strip plate polishing chrome plating. The movable beam is aluminum beam. Pneumatic locking of the pin plateThe frame of the whole machine is welded with high-quality steel plates and treated by stress relief. The structure is beautiful, the top is equipped with lifting earrings or holes, and the bottom vibration damping pad is used to eliminate vibration. The lubrication adopts the forced circulation of the oil storage tank, and the oil circuit is provided with a pressure measuring mechanism; On the one hand, the oil circuit has a certain pressure, the main motor starts to work, on the other hand, it has an oil cut-off alarm self-protection device, and can observe the use of lubricating oil according to the pressure display value, the oil pressure gauge uses a pointer display table.

2、The main bearings are made of German FAG and international famous brand rolling bearings produced by Ina Company. The oil seal is made of high quality linear oil seal. The guide sleeve is equipped with oil-permeating negative pressure suction device. The spindle is heat treated with 40cr, diameter φ80mm.

3、The main motor adopts AC frequency conversion control, the in-and-out roller continuous frequency conversion control, and the discharge has a pneumatic lifting strong magnet needle.

4、The supporting net board and stripping net board are respectively lifted by electric power, and the upper and lower limited position devices. The acupuncture depth is displayed by digital instrument, and the whole machine work (including whether the motor works or not, the adjustment of the speed, the numerical display of the distribution speed, and the display of the needle depth) is displayed by actual numbers.
Feed a roller.